514-WINTER-02
Blackburn Arms
The majority of the work had been completed the previous day, and what remained were the refinements and finishing touches. Isurs were extremely particular about the completeness and aesthetic of any product that were turned over to outsiders, for it represented the pride of their race. Any affront to the industry of smithing would bring dishonor to their father Izurdin.
"You're early today!" Richard Blackburn welcomed jovially as Aedi stepped into the forge. The local smith towered over the Isur by a good number of inches.
"So are you," Aedi remarked noncommittally as he located his designated spot.
He appraised the sword, and noted that he still had not clasped a proper hilt upon the bare steel base, had not affixed a proper guard, had not refined the edges of the weapon, and had not performed what he promised the day before. However, he was confident that he would be able to complete this little project today.
Deciding to start the day with the easy part, and also considering that the furnace was still in the midst of being warmed up, he went ahead to the whetstone, taking the rough blade along. Placing it against the smooth surface, he began peddling the wheel, and the familiar sound of grinding steel filled the silent workshop.
"What did the boys think of Mister Hilckle's blade?" Aedi raised his voice over the noise.
"It's the first time they've seen such a strange blade, Mister Aghanim," Came the loud reply from the furnace at the end of the smithy. "And I must also personally admit, it's not a very good blade for the art of slaughter as well."
Aedi found himself inclined to agree. This was a blade made primarily to cut, for its tip was strangely squarish and was obviously not suitable or thrusting, unless to merely shove rather than to pierce. The blade was also too long and too wide for its hilt, and the inefficient distribution of leverage meant that the sword could only swing in one unbroken motion before requiring a recharging action to rewind for another attack.
"Tis not a blade I would use to duel." The Isur admitted as he continued peddling the whetstone, slowly pushing the length of the blade against the rotating surface to sharpen its edge. As a first morning activity, it sufficed in warming up his body for the more strenuous activities later on, and the smith could feel the blood beginning to pump throughout his muscles.
"How goes your forging, then? If I may gander from the looks of it now, might Dargus receive his weapon by today's end?" The burly owner asked as he threw more lumber into the growing fire.
"I am hopeful that is the case," Aedi replied as he continued grinding the edge of the sword. He mentally took note of what he was going to do next, and turned the blade over to its opposite edge.
"Why, who do we have here?" Exclaimed Blackburn as he called over his shoulder. A young human whose height placed him squarely in between that of Blackburn's and Aedi's had appeared at the entrance of the forge. Aedi glanced over and noticed the prominent white hair, contrasting strongly against the youthfulness of his face.
A Sym, perhaps?
"He comes to help out sometimes, Mister Aghanim, I hope you won't mind if he bothers you a little," Blackburn explained.
Without skipping a beat, Aedi continued cycling the stone, gradually finishing up the polishing which was also the easiest sub-task of the day, "Sure. No problem."
Blackburn Arms
The majority of the work had been completed the previous day, and what remained were the refinements and finishing touches. Isurs were extremely particular about the completeness and aesthetic of any product that were turned over to outsiders, for it represented the pride of their race. Any affront to the industry of smithing would bring dishonor to their father Izurdin.
"You're early today!" Richard Blackburn welcomed jovially as Aedi stepped into the forge. The local smith towered over the Isur by a good number of inches.
"So are you," Aedi remarked noncommittally as he located his designated spot.
He appraised the sword, and noted that he still had not clasped a proper hilt upon the bare steel base, had not affixed a proper guard, had not refined the edges of the weapon, and had not performed what he promised the day before. However, he was confident that he would be able to complete this little project today.
Deciding to start the day with the easy part, and also considering that the furnace was still in the midst of being warmed up, he went ahead to the whetstone, taking the rough blade along. Placing it against the smooth surface, he began peddling the wheel, and the familiar sound of grinding steel filled the silent workshop.
"What did the boys think of Mister Hilckle's blade?" Aedi raised his voice over the noise.
"It's the first time they've seen such a strange blade, Mister Aghanim," Came the loud reply from the furnace at the end of the smithy. "And I must also personally admit, it's not a very good blade for the art of slaughter as well."
Aedi found himself inclined to agree. This was a blade made primarily to cut, for its tip was strangely squarish and was obviously not suitable or thrusting, unless to merely shove rather than to pierce. The blade was also too long and too wide for its hilt, and the inefficient distribution of leverage meant that the sword could only swing in one unbroken motion before requiring a recharging action to rewind for another attack.
"Tis not a blade I would use to duel." The Isur admitted as he continued peddling the whetstone, slowly pushing the length of the blade against the rotating surface to sharpen its edge. As a first morning activity, it sufficed in warming up his body for the more strenuous activities later on, and the smith could feel the blood beginning to pump throughout his muscles.
"How goes your forging, then? If I may gander from the looks of it now, might Dargus receive his weapon by today's end?" The burly owner asked as he threw more lumber into the growing fire.
"I am hopeful that is the case," Aedi replied as he continued grinding the edge of the sword. He mentally took note of what he was going to do next, and turned the blade over to its opposite edge.
"Why, who do we have here?" Exclaimed Blackburn as he called over his shoulder. A young human whose height placed him squarely in between that of Blackburn's and Aedi's had appeared at the entrance of the forge. Aedi glanced over and noticed the prominent white hair, contrasting strongly against the youthfulness of his face.
A Sym, perhaps?
"He comes to help out sometimes, Mister Aghanim, I hope you won't mind if he bothers you a little," Blackburn explained.
Without skipping a beat, Aedi continued cycling the stone, gradually finishing up the polishing which was also the easiest sub-task of the day, "Sure. No problem."